Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Hitting the track tomorrow

  1. #1
    Inactive Member Holden's Avatar
    Join Date
    November 6th, 1999
    Posts
    3,007
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Temperatures should be in the lower 60's, dropping into the 50's before the night's over.

    Hopefully I'll beat my last time 14.180.

    I'm bringing a tire pump this time so I'll let more air out of the fronts and add more to the rears. (I didn't want to drive 45 minutes outbound on 45psi rear and homebound on 18psi last time!)

    So my tires will be at 18f/45r. Shocks at 1f/4r. Yoko AVSi's all around.

    Any advice on dealing with cold track surfaces? It is very smooth and heavily rubber coated at the start. I had little trouble getting a 2.2 60' last time (my first time dragging).

    Thanks,

    Greg

  2. #2
    Inactive Member Max Psi GSR's Avatar
    Join Date
    December 15th, 1999
    Posts
    860
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hey Holden, if i were you, this is what id do..

    Front left tire at 21lbs, and front RIGHT tire at around 17lbs....kinda helps when you have an OPEN DIFF., like me...

    Id also put 50lbs in the rears...less rolling resistance.

    With this setup i can get 2.14 to 2.17 60fts all day long on my 205/40/17's, while launching at 4,000 rpms.

    Good luck,
    Tony


    ------------------
    96 GSR, JRSC@6psi, Monthly Autocrosser, Weekly Drag Racer, and ALWAYS daily driven! [email protected] in the 1/8th, shootin for 8.5 with some new "goodies"!

    http://www.autorage.cc
    http://www.etrscca.org
    http://www.honda-tech.com
    AOL Instant Mess.= KDXTASY

  3. #3
    Inactive Member Holden's Avatar
    Join Date
    November 6th, 1999
    Posts
    3,007
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Tony: Sorry for the personal question, but how much do you weigh? I'm 185 pounds.

    I'll follow your advice on mis-matched pressures, but if you're much larger than me I'll lower the driver's front pressure a little form what you say.

    Judging by your sig., I'll take your word on this one!

    Thanks,

    Greg

  4. #4
    Inactive Member Max Psi GSR's Avatar
    Join Date
    December 15th, 1999
    Posts
    860
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    No problem....i weigh 175lbs.

    I usually goto the track with about 2 gallons in the tank...

    However, now that i installed my E.S. front swaybar bushings, im begining to get more wheelhop.....its not bad, but at the top of 1st gear itll kinda bounce a tad, not much, jus noticeable.

    I guess, if i diconnected the bar, it would take care of ANY wheelhop......its not a big concern though

    And abbou the tire psi, id jus play with it....those psi's work for me on A520's, jus have fun, thats what i do!

    Tony



    ------------------
    96 GSR, JRSC@6psi, Monthly Autocrosser, Weekly Drag Racer, and ALWAYS daily driven! [email protected] in the 1/8th, shootin for 8.5 with some new "goodies"!

    http://www.autorage.cc
    http://www.etrscca.org
    http://www.honda-tech.com
    AOL Instant Mess.= KDXTASY

  5. #5
    Inactive Member BlownSOL's Avatar
    Join Date
    August 2nd, 2000
    Posts
    244
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Sniff, sniff, YUP, I smell 13's! do it Greg smile

  6. #6
    Inactive Member 228GSR's Avatar
    Join Date
    January 27th, 2000
    Posts
    303
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Good luck...don't come home without a 13 sec. timeslip!!!

    ------------------
    99' GSR 13.6 @ 103.4mph
    -JRSC w/ Walbro Fuel Pump, AEM Intake, Tanabe Racing Medallion Exhaust, Mugen Header, Ground Control Coilovers/ Koni Adjustable Shocks, Black 17x7.5 Volk Racing SE37's, and Wings West Body Kit
    Since then: Quaife LSD, ACT Clutch, ZEX Ultra Lightweight Flywheel, AEM Cam gears

  7. #7
    Inactive Member CivicR's Avatar
    Join Date
    October 8th, 1999
    Posts
    901
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Holden you can do it man!!!...I hit a [email protected] a 2.1 60ft...with the drag radials on my friends Integra with a [email protected]/H/E...and full interior...it was a nice cool night(here in florida it was in the high 60's maybe?)....just make sure you lower the pressure and heat those drag radials up nice!!

    ------------------
    John
    B18C1 powered Civic EX Coupe
    '92 Civic VX Hatch...waiting for H22A

  8. #8
    Inactive Member Holden's Avatar
    Join Date
    November 6th, 1999
    Posts
    3,007
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Thanks for the encouragement guys.

    The forecast low for tonight is 40 degrees by midnight, no rain. Since my 14.180 was at around 70 degrees, I should definitely get faster.

    I'm realistically hoping for a 14.0##, but will bring my helmet just in case!

    I'll be psyched to hear, "Here's your slip. Do you have a helmet?" WOOOOOHOOOOOO!!!

    My brother's 240SX/SR20DET is still not broken in, so he's going to drive his 1986 Maxima (automatic!) for R/T practice. How high can the ET timer count? wink

    btw, I don't have drag radials. I have Yoko AVSi's that are very worn from 50 or so autcross runs this summer.

    Greg

  9. #9
    Inactive Member Holden's Avatar
    Join Date
    November 6th, 1999
    Posts
    3,007
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Run 1:

    R/T 0.793
    60 2.229
    330 6.029
    1/8 9.107
    MPH 82.55
    1000 11.749
    1/4 13.983
    MPH 100.56

    Run 2:

    R/T 0.771
    60 2.235
    330 6.019
    1/8 9.112
    MPH 81.88
    1000 11.744
    1/4 13.969
    MPH 101.06

    Run 3:

    R/T 1.018 !!!!!!!!!!!!
    60 2.214
    330 6.007
    1/8 9.097
    MPH 83.07
    1000 11.720
    1/4 13.937
    MPH 101.41


    YEAH BUDDY!!!!!!!!!!!!!!!

    I followed Max Psi GSR's advice exactly. Temperatures were 60F down to 55F.

    BTW, My timing was set at 8 degrees. My brother forgot to bring the timing light so I ran as it was.

    Going to bed psyched!

    Greg

  10. #10
    Senior Hostboard Member JRCivic's Avatar
    Join Date
    January 13th, 2000
    Posts
    3,835
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Nice times Greg... glad to see you have dipped into the 13's !!!


    ------------------



    '93 Civic Si H/B with B18C1, JRSC @ 8psi
    Best 1320: 12.68 at 110 mph

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •